1. Main Features:                                                                       

1.Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.

2.Hydraulic synchronised positive stop design,and by DELEM programmable controller assuring accurate repeatability &ease of use.

3.Integrated hydraulic system(Bosch-Rexroth form Germany)allowing rapid approach switching automatically to slow bend.

4.Servo drive with DA66T System operated back gauge with quality support fingers also with vertical adjustment

5.Inch, single mode being designed for the machine and servo and maintain time can be controlled by the server Driver.

6.the distance of upper slide moving down is adjusted by grating ruler with high precision

7.Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety.

2. Standard Equipment:                                                                        

1. Delem DA66T CNC control System

2. Powered Depth Y1-axis&Y2-axis,X-axis&Z1-axis&Z2-axis&R-axis&V-axis&Back gauge X-axis (X-axis 0.01mm/Y1/Y2X/Z1,Z2-axis 0.01mm)

3. Servo motor control block

4. HIWIN Ball screws & Polished rod with 0,01mm accuracy.

5. Plate Support Arms

6. Germany Bosch-Rexroth Hydraulic

7. Germany EMB Tubing connector

8. Germany Siemens Main Motor

9. Tele mecanique/Schneider Electrics

10.Hydraulic &Electrical overload protection

11.Top and Bottom Tooling(86°,R0.6mm)

12.Safety Standards(2006/42/EC):

3. Safety Equipment:                                                                        

1.EN 12622:2009 + A1:2013          2.EN ISO 12100:2010      3.EN 60204-1:2006+A1:2009

● Front finger protection device ( safety light curtain )

● South Korea KACON pedal switch ( 4 security grade )

● Back metal safeguard, CE standard

● Safety relay monitors completed with pedal switch, safety protection devices

● Safety standard（2006／42／EC）

4. Delem DA58T CNC Control system:                                                              

The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of today’s press brakes. Ease of use combined with state-of-the-art technology go hand in hand, improving productivity.
 The touch screengives access to the proven Delem user-interface and enables direct navigationbetween programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application.
 The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.
 Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever.

1. 3D visualisation in simulation and production

2. 17″ high resolution colour TFT

3. Full Windows application suite

4. Delem Modusys compatibility (module scalability and adaptivity)

5. USB, peripheral interfacing

6. User specific application support within the controllers multitasking environment

7. Sensor bending & correction interface

5. Specifications:                                                                         

6.Main Configuration：