ProductsCurrent Location :Home > Products > CNC Press Brake
CNC Press Brake DA53T 3+1 axis
【Brief】:CNC Press Brake
【Series】:CNC Press Brake

1. Main Features:                                                                       

1. Brand-new industry design combined with modern aesthetic concept, high-quality production technology, simple appearance.

2. Latest high-frequency responding hydraulic control technology, faster, more efficient and accurate.

3. Heat treatment of the rack, rigidity optimization verification on entire machine and the application of hydrauliccrowning structure jointly ensure the bending precision of MB8 series Press Brakes.

4. Optimal ratio of parameters and core configuration ensure stable performance, and easy operation.

5. DA53T controlleris equipped with standard 3+1 axis (Y1, Y2, X axis and W axis crowning). Additionally, the optional axis can be used for R axis or Z axis. At the same time, suitable die can be selected to realize bending processing of various workpieces with complex shapes.

6. The Press Brakeadopts full closed-loop electro-hydraulic servo synchronouscontrol technology. The position signal of the slide block is fed back to the CNC controller by the grating ruler on both sides, and then CNC controller controls the opening size of the synchronous valve and adjusts the quantity of the oil cylinder, so as to control the slide block (Y1,Y2) to run at the same frequency and always keep the parallel state to the working table.

7. CNC controller willautomatically control the deflection compensation of the worktable, in order to achieve uniform angle on full length of the workpiece according to machine process state.

8. Using hydraulic crowning methodor mechanical crowning method, the workpiece with uniform precision over the whole length of the worktable can be obtained. The hydraulic crowning is composed of a group of oil cylinders in the lower working table, which can make the working table move relative to each other and form an ideal curve with convection to ensure the relation between the relative position of the sliding block and the bearing force remains unchanged. The compensation amount is determined by the CNC controller according to the thickness of the plate and the material characteristics.

2. Standard Equipment:                                                                        

 Netherlands DELEM DA53TCNC controller

 Grating ruler controls depth Y1 and Y2 axis(y1/y2-axis 0.01mm)

 Servo motor drive and control X axis(X-axis 0.01mm), manually adjusts R axis up and down, fingers can easily move along the cylindrical guide.

 HIWIN ball screw and linear guide precision 0.01mm

 Front carrier can be adjusted along the linear guide in the worktable direction

 Germany Rexroth closed-loop electro-hydraulic servo synchronous control system

 Germany EMB oil tube connectors

 Germany Siemens main motor

 Germany Siemens main motor

 Hydraulic and electrical overload protection

 The upper die adopts mechanical quick clamping European upper die, while the lower die adopts single V double V or 4V quick changing type or multi-v lower die

3. Safety Equipment:                                                                        

1.EN 12622:2009 + A1:2013          2.EN ISO 12100:2010      3.EN 60204-1:2006+A1:2009

●Front finger Protection(Safety light curtain) 

●South Korea Kacon Foot Switch(Level 4 of safety)

●Back metal safe fence with CE standards

●Safety relay with Monitor the pedal switch and safety protection

4. Delem DA53T    CNC Control system:                                                              

 10.1″ wide screen TFT

 LED backlight

 1024 x 600 pixels

 Industrial grade touch screen

 Storage capacity 1 GB

 Data backup / restore via USB

 USB flash memory stick

 Integrated valve amplifier

 Power-down memorisation

 Profile-53TL offline software

5. Specifications:                                                                         

6.Main Configuration:

1. Main configuration list

1-

NC Control system

DA53T System

2-

Electrical components

Schneider Electrical from French

3-

Main Motor

Siemens from Germany

4-

BackGauge & RAMDrive

Inverter from Taiwan delta

Accurate positioning control

5-

Ball screw/ Liner guide

HOLLAND DELEM

6-

Foot switch

KACON from South Korea

7-

Travel switch

Schneider Electrical from French

8-

Hydraulic System

Bosch-Rexroth form Germany

9-

Hydraulic Pump

Bosch-Rexroth form Germany

Optional

10-

Tubing connector

EMB form Germany Brand

11-

ManualCrowning system

Pls inquire us

Optional

12-

Three color Alarm Lamp

Yes      □No

2.Safety Configuration (optional)

1-

Warning of high oil temperature

Yes   □No

2-

High oil pressure protection

Yes   □No

3-

Motor overload protection

Yes   □No

4-

Laser Safety Protection

□Yes     No

5-

Left & Right side protection

Yes  □No

Fixed type(metal)

6-

Electricity leakage protection

Yes  □No

7-

Safety Relay

Yes  □No

8-

Monitoring and Redundant valves

Yes  □No

9-

Safety standards

CE    □CSA    □NR-12    □OSHA

Related Products
Pre:CNC PRESS BRAKE NC ESTUN E21 system
Next:WE67K Series DELEM DA53T 4+1 axis ( X, Y1, Y2, R +V ) Hydraulic CNC Press Brake

Email:
Press Brake
Phone:
Hydraulic shearing machine
Whatsapp:
CNC Fiber Laser Cutting Machine
Address:
Mingjue Industry area, Shiqiu Town, Lishui district, Nanjing City, Jiangsu Province, China